All tied together. View your logs and trace log values to any table or 1d curve setting in the system .
Now with Full Application Playback!
Now available in TunerStudio MS Ultra!
TunerStudio VE Analyze Live, the industry's 1st ; most proven, fast and accurate Live Autotune, now brings MegaSquirt Trim Table Autotune! Even better, you don't have to have a Wideband for each cylinder! Sure it will autotune all your trim tables at once if you do have a wideband per cyclinder, but you can also have this computer analysis tune your trim tables 1 at a time with only 1 extra Wideband moved between sessions. If you have 2 extra widebands, you can tune trim tables 2 at a time; 3, 3 at a time all the way to a wideband per cylinder.....
Available for MS3 and MS2 Extra firmwares.
MS3 - Yes if running full or semi-sequential you have full Individual Cylinder automatic tuning of each trim table.
MS2 Extra Firmware - If using the the Trim Tables, you can autotune the 1-4 trim tables!
Using Trim Table Autotune
Using 2 to 8 EGO Sensors on MS3, Trim Table Auto-Tune will tune your the trim tables for each cylinder to insure that you are getting the most from every cylinder!
Ok, how does this work, especially if you don't have as many Wideband O2 sensors as cylinders? Well here we go, by default Trim Table Analyze, will assign EGO sensor 1-8 to cylinder 1-8, however, it offers the option to only work on a subset of your trim tables and lets you set what EGO sensor to use. You will need an O2 Sensor bung on every cylinder, but don't need to have a Wideband in all of them at once.
MS3 Trim Table Autotune, page1:
So say you have a 6 cylinder and only 1 Wideband O2 sensor... In this case you would first make sure you have a good tune on your main fuel table using that 1 wide band in its normal location, Use the standard VE Analyze Live on your main Fuel table. Once you fell the table is well tuned, now you can focus on cylinder trim tables. To do so, use the 2nd EGO Sensor for each of the cylinders, one cylinder at a time. In TunerStudio you can let Trim Table Auto Tune work on as many cylinders as you have EGO sensors, so 1 at a time by moving the EGO sensor from cylinder to cylinder or do them all at once if you have a WB for each cylinder.
MS2 Extra Trim Table Autotune:
So in summary, using Trim Table Autotune is similar to the VE Analyze MegaSquirt users are used to. While having a Wideband for each cylinder would be awesome, it is not nessecary!
New Gauge Styles!
New Dashboards!
New Photo Real Default Dash
 |
 |
 |
 |
Designer Mode improvement!
|
Most Designer mode Properties are now bundled into a single dialog for easier access.
New Click actions allow you to assign actions to a single click or touch and / or another action to a long click. Click actions can be: - Open a settings dialog or table - Reset the assigned channel - Start or stop data logging - Trigger and send Controller Commands
|
 |
Now Supported in TunerStudio 3.0 on the 1D array Curve editor:
- Multi Select cell.
- Increment / Decrement blocks of values
- Interpolate from 2 points
- Copy / Paste blocks of values
- Floating elipse to track current run point.
- In The Ultra Edition, you can X-Y plot data on the Cruve Graph.
X-Y Plotting in TunerStudio MS Ultra
Load a log with the pass you are shooting for. The Vehicle speed can be directly overlaid onto your Perfect Run curve.
This is just one example of this feature usage. You can select any X or Y field to plot on your Curve Graph!
See Video here
Can't find a setting that you are looking for?
Go to the top right corner, type a few letters in the setting name, viola all settings with that phrase or keyword will appear in the list.
Click on the one you are looking for and the dialog with that setting will open.
